MV-A3200CG000E
> 1Gbps Ethernet interface , max 100m transmission
> 128MB on-board frame buffer
> Support multiple image data formats
> Conform to CE, FCC, RoHS certifications
> Software trigger/Hardware trigger/Free run mode
> Compatible with GigE Vision V2.0 protocol and GenICam standard
> 128MB on-board frame buffer
> Support multiple image data formats
> Conform to CE, FCC, RoHS certifications
> Software trigger/Hardware trigger/Free run mode
> Compatible with GigE Vision V2.0 protocol and GenICam standard
- spécification
spécification
| Model | Sensor | Sensor type | Shutter | Resolution | Frame rate （ fps ） | Bit depth | Interface | Mono/Color | Pixel size (μm ) | Sensor size |
| DH-MV-A3200CG000E | IMX290 | CMOS | Rolling | 1920x1080 | 22 | 10 | GigE, POE | Color | 2.9x2.9 | 1/2.8" |
| Model | DH-MV-A3200CG000E |
| Effective Pixels | 2.07MP |
| SNR | >38dB |
| Dynamic Range | Support DOL-HDR |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output |
| Image Format | Mono8, BayerRG8/10/10Packed, BayerGB8/10/10Packed, YUV422Packed |
| Binning | -- |
| Gain | X1~X32 |
| Gamma | Range from 0 to 4, support LUT |
| Exposure Time | 17.5μs~1s |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode |
| Image Buffer | 64MB |
| User Setting | Support two sets of user-defined configurations |
| Dimensions | 29mmx29mmx42mm( not including lens mount and rear case connector) |
| Weight | 88g |
| Power Supply | POE/DC power supply by Hirose connector, with voltage range from 6V to 26V |
| Power Consumption | 12V≈3.3W |
| Lens Mount | C |
| Temperature | Storage temperature: -30° C~ + 80° C; Operation temperature: -30° C~+50° C |
×