Cisco N6001P-6FEX-10GT Fiche technique

N6001P-6FEX-10GT

The Cisco Nexus 6001P switch is a 1RU 10 and 40 Gigabit Ethernet switch offering wire-speed performance for up to sixty-four 10 Gigabit Ethernet ports for Ethernet and FCoE traffic, with an overall throughput of 1.28 terabits per second. The Cisco Nexus 6001P offers 48 fixed 1/10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) ports and four 40 Gigabit Ethernet QSFP+ ports. Each 40 Gigabit Ethernet port can be split into four 10 Gigabit Ethernet ports using a QSFP+ breakout cable. The Cisco Nexus 6001P delivers low port-to-port latency of approximately 1 microsecond and low jitter independent of packet size using cut-through switching architecture and with features enabled.The Cisco Nexus 6001P can be deployed in multiple scenarios - direct-attach 10 and 40 Gigabit Ethernet server-access and high-density fabric extender aggregation deployments, leaf and spine designs, and compact aggregation - to build scalable Cisco Unified Fabric across a diverse set of physical and virtual server environments in the data center.

Obtenir des rabais Demande de devis en vrac et projet

Présentation du produit
spécification
Historique des prix

Présentation du produit

Produit	N6001P-6FEX-10GT
Description du produit	N6001P Chassis with 6 x 10GT FEXes with FETs
Catégorie de service	N/A
Prix global en USD	$99000.00
test	888
Quantité Min	N/A
Quantité Max	N/A
Durée	N/A
Possibilité de commande	N/A
Identifiant de l'article	N/A
Programme de service	N/A
Catégorie Base Nom de la remise	N/A
Date de fin de vente	N/A

Technical Specifications

General

Device Type: Switch - L3 - managed - with 6 x Cisco Nexus 2232TM-E 10GE Fabric Extender, 96x 10G SFP+ module (FET-10G)

Enclosure Type: Rack-mountable 1U

Subtype: 40 Gigabit Ethernet

Ports: 48 x 10 Gigabit SFP+ + 4 x QSFP+

Performance: Forwarding performance: 1.28 Tbps

Capacity: Virtual interfaces (VLANs): 4096 ¦ ACL: 4000 ¦ IPv4 routes: 8000 ¦ IGMP groups: 8000

MAC Address Table Size: 256K entries

Jumbo Frame Support: 9216 bytes

Routing Protocol: RIP-2, BGP, EIGRP, IGMPv2, HSRP, VRRP, OSPFv2, PIM-SM, IGMPv3, EIGRP for IPv6, OSPFv3, MSDP, static IPv4 routing, static IPv6 routing

Remote Management Protocol: SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI

Authentication Method: RADIUS, TACACS+

Features: VLAN support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Equal-Cost Multipath (ECMP), Rapid Per-VLAN Spanning Tree Plus (PVRST+), DHCP relay, Link Aggregation Control Protocol (LACP), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF)

Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz

Expansion / Connectivity

Interfaces: 4 x 40Gbit LAN QSFP+ ¦ 48 x 10Gbit LAN SFP+ ¦ 1 x management

Power

Power Device: Internal power supply - hot-plug

Installed Qty: 2 (installed) / 2 (max)

Power Redundancy: Yes

Power Redundancy Scheme: 1+1

Voltage Required: AC 100/230 V (50/60 Hz)

Features: Front-to-rear air?ow

Miscellaneous

Compliant Standards: CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, EN300-386, UL 60950-1 Second Edition, GB 4943, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A

Dimensions & Weight

Width: 17.3 in

Depth: 30 in

Height: 1.7 in

Weight: 31.99 lbs

Manufacturer Warranty

Service & Support: Limited warranty - advance parts replacement - 1 year - response time: 10 days

Environmental Parameters

Min Operating Temperature: 32 °F

Max Operating Temperature: 104 °F

Humidity Range Operating: 5 - 95% (non-condensing)

Min Storage Temperature: -40 °F

Max Storage Temperature: 158 °F