Cisco N5548UP-4N2248TP Fiche technique

N5548UP-4N2248TP

Today's data centers are increasingly filled with dense rack-mount and blade servers that host powerful multicore processors. The rapid increase in in-rack computing density and the increasing use of virtualization software combine to accelerate the demand for 10 Gigabit Ethernet and consolidated I/O: applications for which the Cisco Nexus 5000 series switches are an excellent match. With low latency, front-to-back cooling, and rear-facing data ports, the Cisco Nexus 5000 series is designed for a broad range of physical, virtual, storage access, and high-performance computing environments, thus giving customers the flexibility to meet and scale their data center requirements in a gradual manner and at a pace that aligns with their business objectives.The switch series, using cut-through architecture, supports line-rate 10 Gigabit Ethernet on all ports while maintaining consistently low latency independent of packet size and services enabled. It supports a set of network technologies known collectively as Data Center Bridging (DCB) that increases the reliability, efficiency, and scalability of Ethernet networks. These features allow the switches to support multiple traffic classes over a lossless Ethernet fabric, thus enabling consolidation of LAN, SAN, and cluster environments. Its ability to connect Fiber Channel over Ethernet (FCoE) to native Fiber Channel protects existing storage system investments while dramatically simplifying in-rack cabling.In addition to supporting standard 10 Gigabit Ethernet network interface cards (NICs) on servers, the Cisco Nexus 5000 series integrates with multifunction adapters called converged network adapters (CNAs) that combine the functions of Ethernet NICs and Fiber Channel host bus adapters (HBAs), making the transition to a single, unified network fabric transparent and consistent with existing practices, management software, and OS drivers. The Cisco Nexus 5000 series is designed for data center environments with cut-through technology that enables consistent low-latency Ethernet solutions, with front-to-back cooling, and with data ports in the rear, bringing switching into close proximity with servers and making cable runs short and simple. The switch series is highly serviceable, with redundant, hot-pluggable power supply and fan module.The Cisco Nexus 5548UP Switch delivers innovative architectural flexibility, infrastructure simplicity, and business agility, with support for networking standards. For traditional, virtualized, unified, and high-performance computing (HPC) environments, it offers a long list of IT and business advantages.

Obtenir des rabais Demande de devis en vrac et projet

Présentation du produit
spécification
Historique des prix

Présentation du produit

Produit	N5548UP-4N2248TP
Description du produit	Nexus 5548UP/4xN2248TP
Catégorie de service	N/A
Prix global en USD	$51000.00
test	888
Quantité Min	N/A
Quantité Max	N/A
Durée	N/A
Possibilité de commande	N/A
Identifiant de l'article	N/A
Programme de service	N/A
Catégorie Base Nom de la remise	N/A
Date de fin de vente	N/A

Technical Specifications

General

Device Type: Switch - 32 ports - managed - with 4 x Cisco Nexus 2248TP GE Fabric Extender

Enclosure Type: Rack-mountable 1U

Subtype: 10 Gigabit Ethernet

Ports: 32 x SFP+

MAC Address Table Size: 32K entries

Jumbo Frame Support: 9216 bytes

Remote Management Protocol: SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI

Encryption Algorithm: AES

Authentication Method: RADIUS, TACACS+, MS-CHAP

Features: Layer 2 switching, VLAN support, Syslog support, Weighted Round Robin (WRR) queuing, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, DHCP snooping, Access Control List (ACL) support, Quality of Service (QoS), Jumbo Frames support, Rapid Per-VLAN Spanning Tree Plus (PVRST+)

Compliant Standards: IEEE 802.3, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 801.1p

Expansion / Connectivity

Interfaces: 32 x SFP+ ¦ 1 x 1000Base-T RJ-45 management ¦ 1 x console management

Expansion Slots: 1 (total) / 1 (free) x expansion slot

Power

Power Device: Internal power supply - hot-plug

Installed Qty: 2

Power Redundancy: Yes

Power Redundancy Scheme: 1+1

Voltage Required: AC 120/230 V (50/60 Hz)

Dimensions & Weight

Width: 17.3 in

Depth: 29.5 in

Height: 1.7 in

Manufacturer Warranty

Service & Support: Limited warranty - replacement - 1 year - response time: 10 days

Environmental Parameters

Min Operating Temperature: 32 °F

Max Operating Temperature: 104 °F

Humidity Range Operating: 5 - 95% (non-condensing)