MV-A3A04MG10E
> 1Gbps Ethernet interface , max 100m transmission
> 128MB on-board frame buffer
> Supports software trigger /external trigger/mixed mode
> Supports several image data formats output /ROI /binning , decimation /mirror etc
>Supports POE and DC 6-26V wide-range power supply
>Conforms to GigE vision V2.0 protocol and GenlCam standard
> 128MB on-board frame buffer
> Supports software trigger /external trigger/mixed mode
> Supports several image data formats output /ROI /binning , decimation /mirror etc
>Supports POE and DC 6-26V wide-range power supply
>Conforms to GigE vision V2.0 protocol and GenlCam standard
- Especificación
Especificación
| Model | Sensor | Sensor type | Shutter | Resolution | Frame rate （ fps ） | Bit depth | Interface | Mono/Color | Pixel size (μm ) | Sensor size |
| DH-MV-A3A04MG10E | MT9J003 | CMOS | Global | 3840 x 2748 | 10 | 12 | GigE, POE | Mono | 1.67 x 1.67 | 1/2.3" |
| Model | DH-MV-A3A04MG10E |
| Effective Pixels | 10.6MP |
| SNR | >32dB |
| Dynamic Range | 65dB |
| GPIO | 6 pin Hirose: 1 Opto-isolated input, 1 Opto-isolated output,1 configurable input/output without opto isolation |
| Image Format | Mono8/10/10Packed/12/12Packed |
| Binning | Support |
| Gain | X1~X32 |
| Gamma | Range from 0 to 4,support LUT |
| Exposure Time | 25μS~1S |
| Trigger Mode | Software trigger/Hardware trigger/Free run mode |
| Image Buffer | 64MB |
| User Setting | Support two sets of user-defined configurations |
| Dimensions | 29mmx29mmx42mm( not including lens mount and rear case connector) |
| Weight | 88g |
| Power Supply | POE/DC power supply by Hirose connector,with voltage range from 6V to 26V |
| Power Consumption | 12V≈2.9W |
| Lens Mount | C |
| Temperature | Storage temperature: -30° C~ + 80° C; Operation temperature: -30° C~+50° C |
×