MV-L5043CG26E
Line Scan Camera
> 256MB on-board frame buffer
> Support multiple image data formats
> Supports flat field correction for multiple user groups
> Conform to CE, FCC, RoHS certfcatons
> Software trigger/Hardware trigger/Free run mode
> Compatible with GigE Vision protocol and GenlCam standard
> Support multiple image data formats
> Supports flat field correction for multiple user groups
> Conform to CE, FCC, RoHS certfcatons
> Software trigger/Hardware trigger/Free run mode
> Compatible with GigE Vision protocol and GenlCam standard
- Specification
Specification
| Model | Sensor | Sensor type | Resolution | Line rate（ Hz） | Bit depth | Interface | Mono/Color | Pixel size(μm ) |
| DH-MV-L5043CG26E | E2V | CMOS | 4096x2 | 26K | 12 | GigE | Color | 5x5 |
| Model | DH-MV-L5043CG26E |
| SNR | 42dB |
| Dynamic Range | 70dB |
| Sensitivity | 81 LSB/(nJ/cm²) |
| GPIO | 6-pin Hirose connector for external power supply; 12-pin Hirose external trigger connector,2 channels for RS422/singleEnded input, 2channels for RS422/singleEnded output,1 channel for RS422/singleEnded is able to configure input/output,and 1 channel for GPIO |
| Image Format | Mono8,BayerRG8/10/10Packed/12/12Packed,RGB8packed,YUV422Packed |
| Gain | X1~X6 |
| Exposure Time | 8μS~1S |
| Trigger Input | RS422 |
| Dimensions | 62mmx62mmx35mm( not including lens mount and rear case connector) |
| Flat Field Correction | Support the import/export of correction result |
| Weight | 230g |
| Power Supply | DC power supply by Hirose connector, with voltage range from 12V to 24V |
| Lens Mount | M42*1(FBL:12.00mm),M42 to C, M42 to F |
| Power Consumption | 12V≈4.5W |
| Temperature | Storage temperature: -30° C~ + 80° C; Operation temperature: -30° C~+50° C |
×