N6001P-8FEX-1G Price Datasheet Others

N6001P-8FEX-1G

The Cisco Nexus 6001P switch is a 1RU 10 and 40 Gigabit Ethernet switch offering wire-speed performance for up to sixty-four 10 Gigabit Ethernet ports for Ethernet and FCoE traffic, with an overall throughput of 1.28 terabits per second. The Cisco Nexus 6001P offers 48 fixed 1/10 Gigabit Ethernet Enhanced Small Form-Factor Pluggable (SFP+) ports and four 40 Gigabit Ethernet QSFP+ ports. Each 40 Gigabit Ethernet port can be split into four 10 Gigabit Ethernet ports using a QSFP+ breakout cable. The Cisco Nexus 6001P delivers low port-to-port latency of approximately 1 microsecond and low jitter independent of packet size using cut-through switching architecture and with features enabled.The Cisco Nexus 6001P can be deployed in multiple scenarios - direct-attach 10 and 40 Gigabit Ethernet server-access and high-density fabric extender aggregation deployments, leaf and spine designs, and compact aggregation - to build scalable Cisco Unified Fabric across a diverse set of physical and virtual server environments in the data center.

Get Discount Bulk Quote & Project Inquiry

Product Overview
Specification
Price History

Product Overview

Product	N6001P-8FEX-1G
Product Description	N6001P Chassis with 8 x 1G FEXes with FETs
Service Category	N/A
Global Price in USD	$102000.00
test	888
Quantity Min	N/A
Quantity Max	N/A
Duration	N/A
Orderability	N/A
Item Identifier	N/A
Service Program	N/A
Category Base Discount Name	N/A
End Of Sale Date	N/A

Technical Specifications

General

Device Type: Switch - L3 - managed - with 8 x Cisco Nexus 2248TP-E GE Fabric Extender, 64x 10G SFP+ module (FET-10G)

Enclosure Type: Rack-mountable 1U

Subtype: 40 Gigabit Ethernet

Ports: 48 x 10 Gigabit SFP+ + 4 x QSFP+

Performance: Forwarding performance: 1.28 Tbps

Capacity: Virtual interfaces (VLANs): 4096 ¦ ACL: 4000 ¦ IPv4 routes: 8000 ¦ IGMP groups: 8000

MAC Address Table Size: 256K entries

Jumbo Frame Support: 9216 bytes

Routing Protocol: RIP-2, BGP, EIGRP, IGMPv2, HSRP, VRRP, OSPFv2, PIM-SM, IGMPv3, EIGRP for IPv6, OSPFv3, MSDP, static IPv4 routing, static IPv6 routing

Remote Management Protocol: SNMP 1, SNMP 2, RMON, Telnet, SNMP 3, SSH-2, CLI

Authentication Method: RADIUS, TACACS+

Features: VLAN support, Broadcast Storm Control, Multicast Storm Control, Unicast Storm Control, Multiple Spanning Tree Protocol (MSTP) support, Access Control List (ACL) support, Quality of Service (QoS), RADIUS support, Equal-Cost Multipath (ECMP), Rapid Per-VLAN Spanning Tree Plus (PVRST+), DHCP relay, Link Aggregation Control Protocol (LACP), Hot Standby Router Protocol (HSRP) support, Virtual Routing and Forwarding (VRF)

Compliant Standards: IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.3ae, IEEE 802.1s, IEEE 802.1Qbb, IEEE 802.1Qaz

Expansion / Connectivity

Interfaces: 4 x 40Gbit LAN QSFP+ ¦ 48 x 10Gbit LAN SFP+ ¦ 1 x management

Power

Power Device: Internal power supply - hot-plug

Installed Qty: 2 (installed) / 2 (max)

Power Redundancy: Yes

Power Redundancy Scheme: 1+1

Voltage Required: AC 100/230 V (50/60 Hz)

Features: Front-to-rear air?ow

Miscellaneous

Compliant Standards: CISPR 22 Class A, BSMI CNS 13438 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN55022 Class A, AS/NZS 60950-1, ICES-003 Class A, RoHS, FCC CFR47 Part 15, EN300-386, UL 60950-1 Second Edition, GB 4943, CSA C22.2 No. 60950-1 Second Edition, EN 60950-1 Second Edition, IEC 60950-1 Second Edition, VCCI Class A

Dimensions & Weight

Width: 17.3 in

Depth: 30 in

Height: 1.7 in

Weight: 31.99 lbs

Manufacturer Warranty

Service & Support: Limited warranty - advance parts replacement - 1 year - response time: 10 days

Environmental Parameters

Min Operating Temperature: 32 °F

Max Operating Temperature: 104 °F

Humidity Range Operating: 5 - 95% (non-condensing)

Min Storage Temperature: -40 °F

Max Storage Temperature: 158 °F